Compatibility Guide
Not sure which accessory fits your lights? Find your Govee model below and shop the right match.
Step 1: Find Your Model Number
Your model number is usually printed on:
- The original packaging box
- A small tag or sticker on the light strip itself, near the connector
- Your Govee app — under Device Settings → About
Look for something like H705A, H706B, or H707C — the letter and numbers together are what matter.
Govee Pro (H706 / H806) owners: the model number alone isn't enough. Govee now sells the H706 with two controller versions. Check the HVIN on your controller label. If it ends in E (for example, H706CE), see the H706CE row in the table below.
Step 2: Match Your Model to the Right Accessories
| Your Model | Product Line | What You Need |
|---|---|---|
| H705A, H705B, H705C | Govee Permanent Outdoor Lights (Version 1) |
Shop all Pro Accessories → Y-Splitter for v1 · Extension Cable for v1/v2/Elite · Extension Cable Pro (also compatible) · Signal Booster (Pro/Version 1) |
|
H705D, H705E, H705F, H805A, H805B, H805C, H805D Also compatible: H702B (Outdoor S14 Bulb String Lights 2) |
Govee Permanent Outdoor Lights 2 / Elite |
Shop all Elite/2 Accessories → Y-Splitter for 2/Elite · Extension Cable for v1/v2/Elite · Extension Cable Pro (also compatible, except the 16ft + Booster option) · Signal Booster (Elite/Lights 2) |
| H706A, H706B, H706C, H806A, H806B, H806C | Govee Permanent Outdoor Lights Pro |
Shop all Pro Accessories → Y-Connector Splitter Pro · Extension Cable Pro · Signal Booster (Pro/Version 1) ⚠️ For H706A/B/C and H806 only. Not compatible with controllers whose HVIN ends in E (H706CE). |
| H706CE (HVIN ends in E) | Govee Permanent Outdoor Lights Pro (new controller version) | ⚠️ Our current Pro cables, Y-connectors, extension cables and signal boosters are not compatible with H706CE. It has a larger connector and the signal direction is reversed. New CE-compatible cables are coming soon. Questions? Email ezlightsgroup@gmail.com. |
| H707A, H707B, H707C, H3A51, H3A53, R707B, R707C | Govee Permanent Outdoor Lights Prism (includes Lights 2 Pro and Sam's Club Prism, same connector) |
Shop all Prism Accessories → Y-Splitter & Extension Cables for Prism · Signal Booster (Prism) |
| H70B4, H70B5 | Curtain Lights 2 | Extension Cable Pro (also compatible) |
Tip: If your model isn't listed above, message us at ezlightsgroup@gmail.com with your model number and we'll confirm the right accessory before you order.
Step 3: Understand What Each Accessory Does
Y-Splitter / Y-Connector
Lets you branch one power run into two directions — useful for wrapping around corners, splitting between the roofline and a porch, or covering more linear footage from a single starting point. Note: your Govee app will recognize one branch as the "main" line; the second branch mirrors it as a synchronized extension, not a separately controlled zone.
Extension Cable
Adds extra distance between your controller/power source and the start of your light run — useful when your power outlet isn't close to where the lights begin.
Signal Booster (Driver Module)
Helps maintain stable data signal and full brightness over longer runs, reducing flickering or signal loss that can happen as light strips get longer or more segments are added.
Still Not Sure?
We're happy to help you figure out exactly what you need — just email us at ezlightsgroup@gmail.com with your Govee model number and a quick description of your setup (e.g., "wrapping two roof peaks and a porch overhang"), and we'll point you to the right combination.